F23A Engine Specs – Hp

The Honda F23A Engine is a 2.3L SOHC inline 4 . It was introduced on the 1997 and later Honda Accord models. The engine comes in two versions, one with a VTC, and one without it. For specific applications the F23A engines were produced with 1-stage VTEC which does not have an extra rocker arm or a solenoid/valve assembly. The F23A is also used in the Acura CL, TL, and TSX models

The F23A is a 2.3L SOHC inline 4 engine.

The F23A is a 2.3L SOHC inline 4 engine that was introduced in 1997 on the Honda Accord. It is also known as the K20A1, and has been used in a number of other Honda models over the years, including the Acura RSX and CR-V.

The F23A engine was first introduced on the 1997 Honda Accord and has been used in many different vehicles ever since. It is still in production today, and there are many reasons why it’s so popular.

The engine comes in two versions, one with a VTC, and one without it.

The engine comes in two versions, one with a VTC and one without it. The variable timing control system allows the engine to run at different RPMs depending on the load you’re putting on it. This is also known as variable valve timing. What that means for you is better fuel efficiency and power delivery throughout your vehicle’s operating range. However, if your application doesn’t require VTC or multiple camshaft profiles (more on this below), then you can still get by with the F23A non-VTC version

For specific applications the F23A engines were produced with 1-stage VTEC which does not have an extra rocker arm or a solenoid/valve assembly. This is similar in design to the older D series engine and cannot be determined by external inspection. The two versions are:

  • F23A1 – For use on CVT equipped Accords only
  • F23A2 – For all other Accord models

The F23A is also used in the Acura CL, TL, and TSX models.

The F23A is also used in the Acura CL, TL, and TSX models.

The Honda Accord uses a slightly detuned version of the F23A that’s called the K20A2.

The F23A is a common engine found in many vehicles and has a good reliability rating by consumers.

The F23A is a 2.3L SOHC inline 4 engine that was introduced on the 1997 and later Honda Accord models. It comes in two versions, one with a VTC (Variable Timing Control), and one without it.

The F23A has a good reliability rating by consumers and can be found on many vehicles from Honda and other manufacturers (such as Acura, Hyundai, Kia).

Conclusion

The F23A is a 2.3L SOHC inline 4 engine. It was introduced on the 1997 and later Honda Accord models. The engine comes in two versions, one with a VTC, and one without it. For specific applications the F23A engines were produced with 1-stage VTEC which does not have an extra rocker arm or a solenoid/valve assembly. The F23A is also used in the Acura CL, TL, and TSX models

Leave a Comment